Now Tuning 2022 Mustang 5.0

Dashpaq+ and Flashpaq are available now for 2022 5.0L Mustang with peak gains of 20hp/38tq! 

With the preloaded tunes available in either programmer and no other modifications, drivability, midrange power, and throttle response will all improve drastically.  Automatic and manual transmission vehicles are supported by both products.

Transmission calibration from the factory leaves a lot on the table when it comes to the needs of the average enthusiast, and Superchips has enhanced every facet, delivering power to the ground at the driver’s will.  Restrictive torque management functions and other “nanny” contingencies are all but bypassed entirely to put the driver in full control.    

Tune File Name                            Octane           HP              TQ

93 Performance                                       93        20            38

91 Performance                                       91        15            30

                         Modified Stock*                       Stock HP/TQ, allows user adjustments

                        *Dashpaq+ only

 

 

Dashpaq+ for Mustang

Dashpaq+ is state-of-the-art, combining engine monitoring with powerful tuning and a healthy menu of optional user adjustments. Controls are through a simple, high-resolution, touchscreen interface, and updates are easy to apply through wi-fi or your computer.   The added ability to monitor and datalog with dozens of available PID’s makes it the true enthusiast’s device of choice.

 

CLICK HERE TO SHOP FOR DASHPAQ+ #10601

User Adjustments with Dashpaq+

        • Cooling fan, adjustable by target coolant temp, range 180-230 degrees
        • MAF Sensor curve (-20% – +30%)
        • Rev limiter, in Neutral, adjust 3000-9000 RPM
        • Rev limiter, in Gear – (3000-9000 rpm)
        • Cam Timing, adjusts Intake and Exhaust +/-20%, in high and/or low RPM ranges
        • Transmission Shift Points by MPH, each upshift from 1-8th gear by +/-20%
        • Global Spark Advance, +/-10 degrees over stock or selected tune
        • Fuel Table from 2000-4000 RPM, richen or lean by 40%
        • Fuel Table from 4000-7000 RPM, richen or lean by 40%

 

Flashpaq: Performance Upgrade to Your Ford Mustang

 For a more budget friendly option, the Flashpaq handheld tuner offers the same performance gains in a simpler plug and play device containing the ability to apply adjustments and read/clear diagnostic trouble codes. 

User Adjustments with Flashpaq 

        • Rev Limiter, Raise
        • Speed Limiter, Raise
        • Auto Start-Stop Disable
        • Fan Temp- Pre-set Lowered temp. table
        • Global Spark Advance- +/- in degrees
        • Transmission shift strategies for automatics- optimized in existing tunes

 

CLICK HERE to shop for Flashpaq #1845

 

Instant Throttle Response on your Mustang with Amp’D 2.0

Superchips Amp’d 2.0L Throttle Sensitivity Booster is easy to install and delivers immediate improvement to the engine’s throttle response. This increased sensitivity optimizes your Mustang’s driving experience and puts power to the ground when you want it!  Amp’d 2.0 offers an elegantly simple solution that generates “seat of the pants” response you won’t find anywhere else.

Amp’d 2.0 (5) preset throttle settings that can be switched on the fly, and an intuitive plug-and-play installation to factory connectors without cutting or splicing wires.  Settings are adjustable through our wireless switch, or the all-new Amp’d 2.0 smartphone app which includes an option to create custom pedal map curves.

CLICK HERE to shop for Amp’S 2.0 #18862-2

TD3 Now Supports Jeep Wrangler Rubicon 392

 

If you’re looking for tuning, monitoring, and on-the-fly controls, the TrailDash 3 is Superchips’ most versatile device.  TD3’s preloaded tuned files open the option to enhance peak engine power by up to 14 hp and 16 lb.-ft of torque with the 93 octane Superchips Tune, as well as one for 91 octane fuel, both of which also improve MPG, and the Crawl tune for real off-roading. Our purpose-built Crawl tune features a recalibrated throttle curve (controlling the engine response to pedal input) that is linear, for precise modulation while easing over steep obstacles at low speeds.

TD3 uses a 5″ high-definition screen with upgraded processor for fast reading and writing to load performance programs, and boasts a high refresh rate ensuring smooth animation for the customizable virtual gauge display.  The recommended software for updating is available for Window and Mac computer, but contains Wi-Fi capability when there is no computer access.

Tuning any Jeep vehicle built in 2015 or later requires an unlocked PCM to allow reading and writing of files, but Superchips has made this step as painless as possible with the included PCM swap.  When you take delivery of your new Flashcal kit, submit this form and we will send an unlocked PCM up front for quick installation and no vehicle down time:  PCM Cross Ship.  A return shipping label will be included to send your original PCM back as a core trade-in.

NOTE: A Gateway Bypass Module (included in kit) must be installed while any adjustment or tuning is being performed on your Jeep JL.

Tune Name              Octane    HP       TQ

Superchips Tune        93        14        16

Performance 91          91        8           11

Crawl                              91        8           11

 

Optional User Adjustments to engine tuning:

      • Speed Limiter, Raised
      • Speed Limit in 4×4 Lo, Raised
      • Throttle Booster -20%/+20% sensitivity over stock or base Superchips tune
      • Electric Fan Control by Target Temp, 150-230 degrees F
      • Idle Speed, +/- 400 RPM from stock
      • Rev Limiter in Drive, lower 900 or raise 200 from stock
      • Rev Limiter in Neutral,  +/-600 RPM from stock
      • Fuel enrichment at WOT (Wide Open Throttle),  20% leaner or richer than stock or selected Superchips tune, 1K-7K RPM
      • Mean Brake Torque (MBT) Spark at WOT , +/-10 deg. over stock or base Superchips tune, in 1K-7K RPM
      • Spark Advance at WOT , +/-10 deg. over stock or selected Superchips tune, in 1K-7K RPM
      • MDS Disable

Quick Options (changes that can be made without reloading a tune):

      • DRL Mode Selector: Headlight in High or Low/Turn Signal/Fog/Euro-Fender
      • Traction Control Disable
      • Factory Fog Light Switch Enable, adds to existing controls if not originally equipped*
      • High Beam Fog Lights Cutout Disable, allows simultaneous use of fog lights and high beams
      • One Touch Turn Signal Enable, one tap triggers 3 blink signal
      • Sway Bar Module Disable, for aftermarket or deleted bar*
      • TPMS Thresholds, Front and Rear axles independent, in 10-56 psi.
      • Speedometer calibration, Tire Height, 20-44”
      • Speedometer calibration, Axle Gear Ratio 2.56 – 5.00

 

*Our devices reconfigure vehicle controls for this associated change, but additional OEM or aftermarket parts are required to complete the conversion.

 

This article at Holley’s Motor Life gives a complete description of EAS, TrailDash 3’s customizable switch and auxiliary sensor controls

See more info about TrailDash 3’s live monitoring and Crawl Screen

Shop for TrailDash 3 kit #42051-JL-3

Take a Sneak Peak at Superchips’ 2016 SEMA Show New Product Lineup!

Superchips plans to make a splash at the 2016 SEMA Show (Booth # 22367) with a host of exciting new products designed specifically for the car, truck, and Jeep markets.  Unveiled at the 2015 SEMA show, and launched in January of 2016, the “F5” platform presented a brand new form factor and total redesign of the engineering infrastructure for Superchips’ flagship product, Flashpaq.  The excitement and sales tied to F5 has fed the development and improvements that will be showcased at this year’s SEMA Show.

Flashpaq F5 Pro is the first of three new products to make a debut at SEMA for Superchips.   The new handheld device, PN 5845, is a vessel designed to read stock vehicle files and load tunes, built through HP Tuner’s custom tuning software.  Custom tuning shops can now expand their reach with a form factor to pair with HP’s VCM tuning suite.  Power levels designed specifically for upgrades added to cars, trucks, and SUVs can be loaded directly to the F5 Pro ($299.95).  Superchips’ drag and drop features used to load the device, make adding power levels and instant performance easier than ever.  “The F5 Pro is welcome news for the HP Tuners brand and our extensive network of dealers.  Our technical partnership will pay dividends for end users and resellers alike” noted Jay Payson, Director of Sales for HP Tuners.

 

 

 

TrailCal is a new product that will be met with enthusiasm amongst 2015-UP Jeep® Wrangler® JK owners.  Superchips is coupling their industry-leading monitoring from TrailDash2 (TD2) with the quick features delivered via Flashcal for Jeep®.  “TrailCal ($449.95) will offer the best of both worlds for those JK owners who would prefer not to swap out their ECM” said Matt Barker, Superchips Category Manager. TrailCal, PN 41501, simply plugs into the diagnostic port, allows the customer to calibrate for tire and gear adjustments, and monitor all their performance on the sleek 5” monitor.  Similar to the TD2, TrailCal is available to connect with the EAS Power Switch for aftermarket LEDs or other accessories.

 

 

 

Flashcal for Truck will come as a welcome new product for gas and diesel truck owners.  Engineered using the same technology found in the Flashcal for Jeep, Flashcal for Truck will deliver quick features and calibration tools.  The days of clunky, outdated instruments are over.  Customers looking for an easy solution for tire and wheel adjustments now have what they need.  Demand for this product has been continuing to grow with many lift companies and service centers looking a tool they can offer their customers. Flashcal now has trucks covered, and the market cornered, with quality and pricing ($199.95) that can’t be matched.