Flashpaq for 2.0L Jeep Wrangler JL

Finally, the performance flash tuning you’ve been begging for! Superchips Flashpaq (P/N 3876-JL) now supports 2018-2020 2.0L Jeep Wrangler JL. The 2.0L turbocharged engine has been a great new option for Wrangler JL owners, offering good fuel mileage and great torque. But aftermarket support for the platform has been limited, until now! Drivability of the 2.0L engine and 8-speed automatic transmission has been great, but of course, our calibration team was able to make it even better with our all-new Flashpaq tuning.

Features:

  • 25hp/20tq Peak Gains
  • 65hp/90tq Max Gains
  • Improved Transmission Shift Strategies
  • Broader Power and Torque Curves
  • Increased Low RPM Performance
  • Better Throttle Response and Turbo Spool-up
  • Eliminates reduced power in 4-Low
  • 87 Octane, 91 Octane, 93 Octane, Crawl Tune
  • PCM Swap Required

 

 

Through extensive development, our team of engineers have worked tirelessly to not only break the PCM coding but to offer even better performance, mileage, and drivability from an already great platform. Not wanting to simply increase boost output, our engineers worked at making multiple changes within the tuning to not only increase peak power and torque, but improve the overall curves, so you get that power and torque sooner. By making changes to the transmission shift strategies, boost curve, timing, and fueling maps the all new Flashpaq tuning will offer better low end power and torque with max gains of 65hp/90ft-lbs torque at 3000 RPM’s. The broader power curves allow for better turbo spool-up, increased mid-range for accelerating in traffic, and the torque you need to keep a bigger set of tires rolling.

Of course, like all our Flashpaq devices, performance tuning isn’t the only advantage here. User’s also have the ability to:

  • Adjust for up to 41” tires
  • Adjust for up to 5.38 gear ratio
  • Enable/Disable TPMS
  • Adjust TPMS Pressure Warnings
  • Adjust Speed and Rev Limiters
  • Enable/Disable Auto Start Stop Function

 

  • 87 Octane – 9hp/11tq
  • 91 Octane – 18hp/22tq
  • 93 Octane – 20hp/25tq
  • Crawl Tune – 18hp/22tq

Like all other 2015+ Jeep models, a PCM Swap and Bypass Module will be required in order to flash performance tuning into the vehicle. Gateway Bypass is included with the Flashpaq device and an unlocked PCM will be shipped to you to trade out your factory PCM.

Order Yours Here

 

*Available for E-Torque and Non E-Torque applications

Pulsar V2 for L5P Duramax

The Pulsar has been a huge hit for the 2017-2019 GM L5P Duramax trucks offering better power, control, and more features than our competitors. So what have we done now?  That’s right, upped our game and knocked it right out of the park with Version 2 for Pulsar 17-19 L5P. Our engineering team has worked hard and now added speed limiter adjuster 98-140, TPMS adjust, manual regen, and transmission relearn for the improved power you get from adding the Pulsar. We didn’t stop at just adding new features and functions we improved the transmission fueling to keep your power longer between shifts improving your 0-60 and quarter-mile times. Check out all these new features below.

New Features/Benefits:

• Speed limiter adjustment 98-140 MPH
• TPMS adjust 40-99 psi
• Tire size 29-50.9”
• Gear Ratio 2.0-6.99
• Clear DTC codes
• Manual regen function
• Transmission relearn

Features/Benefits:

• Up to 90 HP & 156 lb-ft torque
• Change 5 power levels on-the-fly using +/- cruise control buttons
• Connects directly to ECU in engine compartment providing instant power
• Built-in throttle sensitivity control for improved throttle response
• High-idle user settings to adjust RPM during idle (range 700-1100 rpm)
• Simple installation with no complex wiring harness or ECU flashing required

For customers looking for performance, unmatched features, throttle adjustments, no traces of a tuner, and easy to install the Pulsar is your answer. The best part is these new updates are free for current owners and available now by simply updating your Pulsar with the Pulsar Update Cable, PN 98105, with our Update Agent software.

 

Shop the L5P Pulsar here

Dashpaq+ Gets an Upgrade

 

The best thing for Dashpaq+ since Dashpaq+ is now available for download via our Update Agent software. The Superchips Dashpaq+ has been the most advanced, user friendly, all-in-one on-dash tuning and monitoring device on the market for years, but that didn’t stop us from making it even better. The Superchips engineering team has been busy at work to improve many features, including Backup Camera compatibility within the Dashpaq+ and you’re going to love it. How much are these new features going to cost you? Nothing. Nada. Zip. It’s all available now when you update to the latest version with our Update Agent software.

The all-new updates for Dashpaq+ apply to all Dashpaq+ part numbers, whether you’re running it in a Ford, GM, or Dodge/Ram application. Everyone will benefit from our latest software release through quicker load times, easier navigation, and new gauge displays. Possibly the most exciting news of all is that Dashpaq+ will now support our EAS Backup camera (sold separately, p/n 98203), turning your monitor into a super useful rear-mounted camera display to ease backing into a tight spot or hooking up to that bass boat. Once your updates are complete in Update Agent, it’s also a great time to look into registering your device with Superchips and even extending your device warranty.

 

  • All-new backup camera compatibility*

  • All-new user interface updates

  • All-new gauge screen layouts

  • All-new Basic/Advanced Parameter set lists

  • Faster load times between screens

  • Faster start-up times

  • Improved data stability

Download Update Agent here for Dashpaq+ Free Upgrades

 

*Additional EAS Backup Camera kit required

Trailcal Now Covering 2020 2.0L Jeep® JL

Superchips is pleased to extend Trailcal calibration support for 2020 2.0L Jeep® JL Wrangler® with PN 41051-JL. The Trailcal offers multiple options to adjust for larger tires, read/clear trouble codes, adjust speed limiter, disable Auto Start/Stop and more. Trailcal offers a low cost, easy to use functionality through an in-cab touchscreen monitor that can’t be matched anywhere. If you’ve installed an aftermarket suspension lift and some bigger wheels and tires to your 2020 2.0L Jeep® JL, you’ll appreciate the value you’ll find with Trailcal. Best of all, should you decided to add our industry leading performance tuning for the 2.0L when it becomes available, Trailcal can be updated online for conversion to our popular Traildash 2. No more guessing your speed after plugging in with Superchips and re-calibrating for your new tire size or gear ratio.

Shop Trailcal Now

2021 Ford Bronco Revealed: The Jeep Killer?

After fourteen years Ford bronco returns and it’s everything we’d ever hoped for! Ford came out swinging and is undoubtedly looking to steal some market share from Jeep® Wrangler®. Question is, have they done enough with this 2021 Bronco to make it happen? Ford’s development team has obviously done their homework and listened to the market in staying true to their original 60’s Bronco roots in styling and with the strength in their EcoBoost engine program, this one should be a winner. Ford’s offering seven different trim packages in either 2-door or 4-door with base prices starting at $28,500 and peaking out at $63,500. With hundreds of combinations they’re bound to be able to build something for just about everyone with a need to see the outdoors in their SUV.

 

The most exciting part of the 2021 Bronco for us here at Superchips are the available powertrains. With the 2.3L 4-cylinder Ecoboost from Ford Ranger and an optional 2.7L V6 Ecoboost from F-150, we could see some great potential to boost horsepower with our Flashpaq and TrailDash tuning systems here. We currently offer tuning for the 2.7L Ecoboost F-150 and it is a very potent little engine in that platform, should be even more fun in a sporty little Ford Bronco. There are two transmission options depending on which engine you go with, Fords latest 10-speed automatic with Trail Control and an all new 7-speed manual for your clutch lovers. Interestingly enough, if you opt for the manual, a dedicated ‘Crawler’ gear was figured in to the equation which should make for a great rock crawler.

Like the Jeep® Wrangler® it’s trying to defeat for market share, the 2021 Bronco offers some incredibly cool off-road features.

  • Removable doors and top
  • Locking differentials with up to a 4.70:1 gear ratio
  • Advanced 4×4 with auto engagement
  • Rock rails, high clearance fenders and heavy duty bumpers
  • New Terrain Management System with seven G.O.A.T modes
  • Auxiliary power switches
  • Optional marine grade washable interior with built in floor drains.
  • Industry first optional 35″ tire size
  •  Stabilizer bar disconnect

 

Ford’s press site states that 2021 Bronco orders can start being placed right away, but that delivery to dealerships won’t be happening until Spring/Summer of 2021. So while we’re all super excited to see this new Ford Bronco it will still be a while before anyone will get behind the seat of one. Rest assured though, the Superchips team has already narrowed down the choices and picked out the model that will be perfect for our team to get started on product development so we can start offering aftermarket support as soon as possible.

Building our 2020 Jeep® Wrangler® JL: It’s Wrapped!

Well boys and girls here it is, the big reveal on our freshly wrapped 2020 Jeep® Wrangler® JL. After much discussion within our team and listening to input from you guys, we’ve decided to go big and bold on this 2.0L Jeep, a throwback to the 70’s with a little vintage Hot Wheels twist. That bright and attention grabbing Bikini Pearl was just begging for some more flash and we Buzz Graphics nailed it on this one. Couple sweeping stripes, some matte black for contrast and even some graphics added to the hood puts this Jeep® front and center to hopefully grab everyone’s attention in our upcoming ad and video campaigns.

 

 

Now that it has it’s SC branding its time to really start installing some parts and get this Jeep® Wrangler® JL ready for the rocks and muddy trails. With a matching set of Trail Series 2 bumpers from Expedition One, we’ll be able to install our ComeUp winch and carry a our full size 37″ Fury R/T tire for a spare. Of course, first and foremost we’ll need to get our Terrain Flex 3.5″ lift kit from Readylift installed to clear those massive meats. Superchips tuning support for this 2.0L turbo engine is right around the corner, but until then we’ll be sure to put our Flashcal to good use to keep our speedometer reading correctly with the bigger 37″ tires mounted up. We also have our Amp’d Throttle Booster ready to plug in to improve the overall drivability, bringing tha powerband in a little sooner when we roll into the throttle. Checkout our latest video on the build below and make sure you visit our store to outfit your Jeep for the obstacles ahead.

 

 

 

Building our 2.0L 2020 Jeep® Wrangler® JL

 

Quarantine 2020 may have spoiled our Easter Jeep Safari fun and postponed Jeep Beach a few months but we won’t let all that ruin our plans on the build-up of our 2020 Jeep® Wrangler® JL. As a new vehicle to the Superchips fleet, this 2020 JL Rubicon runs the 2.0L turbocharged engine and will be the test mule for our engineering team for R&D and calibration development. We want performance tuning coverage for this engine platform and this will be the Jeep® to help us get there. While we use our fleet vehicles in the shop to develop new tuning and calibration features for our product lines like the Flashpaq, Trail Dash 2 and Pulsar modules, like you, we are all enthusiasts at heart. Testing our products in real world situations is key. Lucky for us, real world testing for a Jeep® means we get to spend time off-road. Crawling the rocks in Moab. Navigating rutted up muddy roads in the woods. Maybe even pushing some snow with the bumper on some mountain pass in the spring. Plus, this particular Wrangler® JL will make a great platform for our marketing team to  get out to events and shows to showcase everything Superchips has to offer the Jeep® crowd.

The Build Plans

The factory Jeep® Wrangler® JL Rubicon is a pretty capable off-road machine, but we all know how much aftermarket support is available for these. With so many options, it makes it easy to build something better suited for your specific needs. Like our customers, we want to be able to use our Jeep® for more than just a daily commute across town. We have every intention of getting this thing out in the sticks and that means stock just isn’t going to cut it much longer. So here’s the introduction to a 2020 Wrangler® JL build, we’re planning to document the process, share it with you, and hopefully get some input from you followers on where to go next.

We’ll be working with some of the best in the business on this project and already have a pile of parts here waiting to be installed. For suspension we’re going with a ReadyLIFT 3.5″ Terrain Flex 2-arm kit so we’ll have enough clearance for some 37×13.50R20 Fury R/T tires. We have a set of bumpers from Expedition One at powder coat, along with a set of their matching rocker guards for some cab protection when crawling. . To aid in off-road recovery, Comeup USA set us up with their Gen 2 winch for that new front bumper. Superchips LIT LED’s will be added for extra lighting at night and Artec Industries custom mounts will help make that an easy install. We also have a set of Artec’s front and rear inner fenders for additional tire clearance. To break up some of that shimmery Bikini Blue, the paint matched top is being replaced with a wicked cool fastback Bestop Trektop. Our graphics team is in the final stages on creating a vehicle wrap too.

Wrangler® JL Performance Upgrades

On the performance side of things, of course there will be a host of Superchips stuff finding it’s way in to the build, including our newly released Amp’d Throttle Booster for the 2.0L Turbo, maybe a Flashcal for tire size adjustments, and as we continue to progress in the launch of performance programmers we’ll get this thing tuned up as well. We have some tricks up our sleeve for a new cold air intake and we’ve got some love for the exhaust side with a Flowmaster Force II axle back kit. We’re going to start getting pretty open and honest on our experiences with this Jeep® Wrangler® JL build. Baseline dyno charts and video to share, installation pictures with some tips or tricks to make your own installs easier, and hopefully you can help us with some tough decisions like what we’re going to name this thing. Plus, all of this will make a great excuse to giveaway some swag or and SC product to you guys following along the way!

Click here to learn more about our current JL Wrangler® and JT Gladiator products

 

2020 F-150 Tuning Support Offers an Extra 86HP

Superchips is pleased to extend coverage of our popular Flashpaq, Dashpaq, and Dashpaq+ for all 2020 Ford F-150. With up to an additional 86HP these simple to use tuners offer everything an F-150 truck owner needs. New tuning support offers performance tunes for 87 Octane, 91 Octane and 93 Octane with improved transmission strategies for both 6-spd and 10-spd models. In addition to impressive power levels, the features and options built in continue to mark the Superchips product line as one of the most sought after tools for increased power at your fingertips. With full control over exciting user-adjustable selections including gear options, speed/rev limiter, shift firmness and more. Dashpaq and Dashpaq+ offer in-cab high resolution color screens that give you all the information you’ll ever need without leaving the drivers seat. Equip your 2020 Ford F-150 with Superchips tuning today

2020 F-150 Tuning Features:

  • Up to 86hp and 63tq for 3.5L Ecoboost
  • Up to 49hp and 62tq for 5.0L V8
  • Up to 42hp and 73tq for 2.7L Ecoboost
  • Unique Transmission Shift Strategies for Normal, Sport and Towing Modes
  • Pre-loaded tuning for 87 Octane, 91 Octane, 93 Octane, Towing and Mileage
  • Adjust for up to 4.56 gear ratio
  • Enable/Disable TPMS
  • Adjust TPMS Pressure Warnings
  • Adjust Speedometer for 28-40” Tire Size
  • Adjust Speed and Rev Limiters
  • Enable/Disable Auto Start Stop Function

Pulsar + TrailCal Performance Bundles Now Available for JL Wrangler® & JT Gladiator

 

Ride equipped with performance upgrades to optimize your driving experience, monitor data in real-time, and add power on the go! The Pulsar + TrailCal kits for 2018-2019 3.6L JL Wrangler® and 2020 3.6L JT Gladiator offer numerous options to add horsepower, calibrate for aftermarket tires and gears, configure a custom gauge layout, and enable exciting features like engine idle adjustment, running light controls, and more. The 5” on-dash screen paired with an inline module can now be used together to blend power, control, and innovative technology to deliver a tremendous driving experience on the JL Wrangler® or JT Gladiator. Shift on the fly, correct your speedometer and ride in style with the new Pulsar + TrailCal performance bundles.
Key Features:
 4 Performance Levels – Performance, Tow, Economy, Stock w/ Options
 Shift between power levels on-the-fly using TrailCal
 Power Gains: 30 HP and 27 ft-lbs TQ
 Gear Ratio: 2.0-10.0
 Low Gear Ratio: 1.0-15.0
 Tire Size: 22.50-40.00
 TPMS On Off
 TPMS Threshold: 22-64 PSI
 Daytime Running Lights
 High Beams/Low Beams
 Turn Signals/Fog Lights/Stock
 Fog with High Beams

 

Superchips Offering Up to 20% Savings on All Products!

Superchips 2019 Holiday Promo - Save upto 20% off SRP.

 

All Superchips products are now up to 20% off!  The holiday season is upon us and the team at Superchips has loaded the marketplace with new products designed to impress and deliver performance to your vehicle.  Effective today through December 31, 2019, you can save up to 20% off SRP!

Check out some of the most exciting, new products now available from Superchips

Superchips Flashcal for the JL Wrangler® has set the standard in the market for consumers adding upgraded tire and gear packages.  Advanced features paired with ease of use continues to mark Flashcal as one of the most popular and convenient upgrades available for the enthusiast or recreational Jeep® owner.  Today, Superchips is thrilled to announce that the Flashcal is now available for the 2020 Jeep® Wrangler® JL 3.6L and 2.0L turbo (PN 3571-JL)!  All of the industry-leading features that have distinguished Flashcal as a leading product in the market are included with today’s release, including auto start/stop, auto park disables, and multiple running light options.

 

Ride equipped with performance upgrades to optimize your driving experience, monitor data in real-time, and add power on the go! The Pulsar + TrailCal kits for 2018-2019 3.6L JL Wrangler® and 2020 3.6L JT Gladiator offer numerous options to add horsepower, calibrate for aftermarket tires and gears, configure a custom gauge layout, and enable exciting features like engine idle adjustment, running light controls, and more. The 5” on-dash screen paired with an inline module can now be used together to blend power, control, and innovative technology to deliver a tremendous driving experience on the JL Wrangler® or JT Gladiator. Shift on the fly, correct your speedometer and ride in style with the new Pulsar + TrailCal performance bundles.

Key Features:
 4 Performance Levels – Performance, Tow, Economy, Stock w/ Options
 Shift between power levels on-the-fly using TrailCal
 Power Gains: 30 HP and 27 ft-lbs TQ
 Gear Ratio: 2.0-10.0
 Low Gear Ratio: 1.0-15.0
 Tire Size: 22.50-40.00
 TPMS On Off
 TPMS Threshold: 22-64 PSI
 Daytime Running Lights
 High Beams/Low Beams
 Turn Signals/Fog Lights/Stock
 Fog with High Beams

Shop Pulsar Kits

 

Superchips is pleased to extend 2019 F-150 tuning support for the Flashpaq (PN 1845), Dashpaq (PN 1060), and Dashpaq+ (PN 10601). New tuning support covers the 2.7L, 3.5L Ecoboost, and 5.0L motors. In addition to impressive power levels, the features and options accompanying today’s release continue to mark the Superchips product line as some of the most sought after tools for increased power, towing capabilities, and full control of over exciting user-adjustable selections including tire size, gear options, speed/rev limiter, and more. Review all power levels, features, and load information below.   Configure your 2019 F-150 and shop today!

 

Today, Superchips is thrilled to announce that the TrailDash 2 Performance Programmer is now available for the 2020 Jeep® Gladiator JT (PN 42051-JT).  All of the industry-leading features that have distinguished TrailDash 2 as a leading product in the market are included with today’s release.  In fact, the TrailDash 2 for JT Gladiator includes some additional options that have been highly sought after amongst enthusiasts including auto start/stop, auto park disable, and multiple running light options.  The Gladiator is making waves in the Jeep world and now with TrailDash 2 tuning, it will be better than ever!

PN 42051-JT does include a bypass jumper module required for use.  Be sure to review the features and information below.  Enjoy the new TrailDash 2 coverage for the 2020 Jeep® Gladiator JT!

 

Looking to buy now and pay later.  Do you just that with Affirm.  Learn more here.

 

Shop All Superchips Products Today

 Looking for additional savings from iconic brands in the automotive industry.  Superchips is pleased to be part of the Holley Performance Group.  Be sure to check out the Holley site and shop for exciting products for a variety of vehicles!