More Horsepower for Ram TRX

For true Ram Hemi enthusiasts, the term ‘enough power’ isn’t in their vocabulary and the all-new Ram TRX proves that. While 702-horsepower from the factory seems quite enough, Dashpaq+ takes the TRX into new territory with +33hp and +28ft-lbs torque to the tires! Our tuning calibrations have been fine tuned for both 91 and 93 Octane and improve throttle response, transmission shift strategies, boost curves, and overall power delivery for impressive street manners.

Dashpaq+ offers state-of-the-art in-cab monitoring with an intuitive color touchscreen with WiFi for easy updates. Dashpaq+ for TRX offers two tuning calibrations and the ability to change multiple vehicle features without ever opening the hood or breaking a sweat. Like all other 2015+ Chrysler vehicles, the factory PCM must be replaced with our unlocked PCM, which is handled through our easy PCM swap process to limit vehicle downtime and out of pocket expense. The TRX will also require our Gateway Bypass module be installed, this module is included with device purchase. Checkout our all-new TRX tuning support today!

  • 93 Octane adds 38hp/28tq

  • 91 Octane tune adds 30hp/24tq

  • Reduced 0-60mph times by 3-tenths

  • Calibrate for tire size changes up to 44”

  • Modified boost curve for improved drivability

  • Enable/disable traction control

  • Adjust cooling fan on temps

  • Rev Limiter – +/- 500 RPM

  • Idle Speed +/- 400 RPM

  • Customer adjustable Throttle Booster feature

  • Disable speed limiter

  • WOT timing – +/- 10% (3 different RPM ranges)

  • WOT Fueling – +/- 20% (3 different RPM ranges)

  • Trans Shifting Improved for Speed and Firmness

  • Improved Transition into Boost

  • Throttle Response Improved in all Modes

 

 

Click here to learn more about Dashpaq+ for TRX Now

TrailDash 3 for Wrangler and Gladiator

Leaning on years of experience, the industries most versatile performance programmer and in-cab monitor Jeep® just got better with the release of the all-new TrailDash 3. TD3 offers our most technologically advanced features with a faster processor for quick tune loads, more responsive touchscreen, higher resolution display, and even Wi-Fi for easy updates. TD3 allows you to add power for an improved driving experience. Calibrate for tire and gear ratio changes. And keep all the data at your fingertips. The all-new sleek case looks incredible in the cab and offers a tuning experience like you’ve never seen before. Tune for more power. Calibrate for tire and gear ratio changes. Available now for 2007-2021 Jeep® Wrangler and Gladiator.

TrailDash 3 for Jeep®: Newer. Sleeker. Faster. In addition to the slimmer case design, the all-new 5″ hi-res display offers edge-to-edge swipe technology with quicker response times and better readability regardless of your lighting conditions. Day or night, the built in light sensitivity meter automatically adjusts the monitors brightness for the best visibility possible. Faster frame rates means more accurate data and the single HDMI port makes installation a breeze, with easy expandability with our EAS accessories like extra pressure and temperature sensors, or even our EAS back-up camera.

Along with all the cosmetic changes and upgrades, TD3 is smarter with an all-new, faster processor and built-in Wi-Fi capability making the user experience better than ever before. With Wi-Fi within the device, internet updates have never been easier. Connect the device to your local WiFi and allow the device to search for updates on it’s own, without ever disconnecting or removing the monitor from the vehicle. No PC required, making this the smartest, Jeep® specific, in-cab device on the market today.

This isn’t just another tuning and monitoring device stolen from the truck market. TD3 was developed specifically for the Jeep® owner with built-in features you’ll love having quick access to in this state-of-the-art device. The all-new CRAWL screen gives you everything you need at your fingertips while off-roading. Vehicle Pitch & Roll, Front & Rear Differential Lock, Swaybar Quick Connect, Line Lock, Rock Lock, TPMS Adjust, along with Engine idle speed and up to four user selectable PID’s. Along with the CRAWL screen, users can also select from multiple screen layouts, to display the data you want to see, exactly how you want to see it. Gauges and layouts are completely customizable with a full range of colors. You can even customize each specific gauge for minimum and maximum data ranges.

For your Rubicon owners, want to turn on your rear locker in 2WD? TD3 can do that. Want front and rear lockers in 4-Hi? TD3 can do that too. Why limit your fun off-road with the OEM’s “4-Low under 25-mph only” stipulation on lockers, when TD3 can give you the excitement of getting so much more wheel speed with lockers and the sway bar disconnected up to 55mph? TrailDash 3 offers the ultimate off-roading experience for Jeep® owners.

<iframe width=”560″ height=”315″ src=”https://www.youtube.com/embed/ZJQHrZG7KJc” title=”YouTube video player” frameborder=”0″ allow=”accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture” allowfullscreen></iframe>

Learn More Here

 

2019+ Silverado 5.3L & 6.2L Tuning Available Now!

2019+ Silverado tuning is finally here with the all-new Flashpaq 2847-S. Available for 2019-2020 Silverado and Sierra with 5.3L and 6.2L engines Flashpaq offers up to an additional 45-horsepower (max gains in 6.2L)! The all-new GM Flashpaq performance programmer (PN 2847-S) comes pre-loaded with tunes developed specifically for daily driving, towing, and performance enthusiasts. Our Mileage XS, Tow, 87 Octane, 91 Octane and 93 Octane tunes offer incredible torque gains throughout the RPM range with the improved drivability you’ve come to expect from Superchips.

Our calibrations team spent a lot of time perfecting our tunes to give you everything you’ve come to expect from a Superchips tuner. By adjusting torque outputs at lower pedal inputs, you’ll love the new throttle response. Adjustments to spark advance offer better power and torque throughout the RPM range, while helping to improve fuel economy. Changes in engine speed limitations allow you you feel that massive power and torque curve for longer. You’ll also notice an improved pedal feel when running in the trucks factory ‘Sport’ mode for an the exciting driving experience you didn’t think possible in a 1/2-ton truck.

This device includes our ‘ECM Send-In’ process, which will require your trucks factory ECM to be removed and shipped to us for unlocking. Once our specialists create the internal ECM modifications, it will be returned to you for re-installation into the truck, where you can then tune with your choice of calibration within the Flashpaq device. The purchase of the Flashpaq 2847-S includes the cost of the ECM Unlock and Next Day Air return shipping of your ECM. So we can limit down time to as little as just 3-days. Our ECM modifications are safe, reliable and compatible with GM dealer tools and flashes. So, your local dealer can still interact with your truck after you’ve returned your Flashpaq tuning to factory settings.

Want to see the impressive dyno charts?

Click here

The Dynamic Duo: Flashcal + Amp’d 2.0 Kits Available Now

Flashcal + Amp’d kit’s just got better with the inclusion of the all-new Amp’d 2.0 Throttle Booster kit.

This dynamic duo has been a top seller for us for years and for good reason. The Flashcal + Amp’d 2.0 Throttle Booster offers users all the vehicle feature control they need after a lift and tire install, with the enhanced driving experience from a better pedal feel. Bigger tires offer that aggressive stance we all love, but we all know what effect they have on acceleration and overall throttle response. Getting that extra rolling mass moving can take some of the fun out of your daily driver, and with this kit, you can get that excitement back with an Amp’d 2.0 Throttle Booster.

Superchips Amp’d 2.0 Throttle Sensitivity Booster is easy to install, delivers immediate improvement with pedal response, and gives you total control of your driving experience.  Amp’d 2.0 offers the industry’s first wireless switch for pedal feel at your fingertips and the all-new app, is a simple solution and for completely customizing your pedal maps. Generate that “seat of the pants power” you can’t find anywhere else with our easy to use pedal sensitivity adjuster. Decreasing pedal lag expedites your vehicle performance curve to occur sooner and supplies quicker turbocharger spool up. We promise it’ll bring a smile to your face the first time you hit the gas.

The included Flashcal allows you to calibrate for your large aftermarket tires, gear ratio changes, while allowing you to read/clear trouble codes, adjust your speed limiter, rev limiter, engine auto start/stop and more.  The Flashcal is a product designed to give premium features and calibration tools to truck and Jeep® owners at a great price.  The days of clunky, outdated calibration tools are over as the Flashcal now brings a premium device and a simple, yet powerful, user interface to the market. Flashcal is big on easy.  Just plug into your truck or Jeep® OBD-II port and select your new tire size or gear ratio, and your truck is calibrated! Installation is simple, no need to visit a shop or bring your vehicle back to a dealership. Plus, with Flashcal, should you decide you’re ready to try our performance tuning, you’re just a simple internet update away!

The all-new Dashpaq+ for GM/Ford/Ram is here!

You read that right. We took our already industry leading touch screen monitoring and tuning device and made it even better. Introducing the next generation Dashpaq+ tuner for gas applications. Looking to continue to set the bar for aftermarket all-in-one tuning devices, the all-new Dashpaq+ offers a full 5″ Color Touch Screen with edge-to-edge swipe technology and the crispest, sharpest display you’ll find anywhere. Our all-new monitor offers a completely redesigned screen and case enclosure that offers a sleeker look and improved performance over our previous generation.  Not only is the display sharper, but we’ve increased the resolution for incredible pixel ratios and top of the line graphics. Our gauge screens are easy to read, easy to navigate, and easy to customize to show you the data you want to see from the drivers’ seat. A bigger processer means faster tune downloads and an all-new WiFi update capability, means there is no need to remove the device from the truck when it’s time for updates.

  • Sleek, state-of-the-art, color touch-screen

  • Faster and more capable than previous models

  • Power levels built specific for daily driving, towing, and performance

  • Up to an additional 86hp, depending on application

  • Optimized tuning for better transmission performance, including shift firmness, TQ management, and more

  • Adjust Speed and Rev Limiters*

  • Correct Speedometer*

  • Simple installation with just one cable for OBD-II connection

  • Monitor important vehicle parameters like trans temp, boost, RPM, engine coolant temperature and dozens more

  • Full color, 5” capacitive touch screen with auto-dimming

  • Offers crystal clear data at your fingertips

  • Highly customizable gauges and backgrounds

  • Boots up directly to gauge screen upon key cycle

  • Swipe capability allows easy switching between screens

  • Built-in performance meter measures 0-60, ¼ mile times and more

  • Advanced integrated data logger with export capability

  • Ability to add vehicle licenses to tune multiple vehicles with one product

  • Clear and Read DTC codes

  • Wi-Fi updateable

 

 

Our tuning calibrations offer better throttle response, improved mileage, better towing performance with less downshifting, and of course just all all-around more enjoyable driving experience. Built specifically with daily drivers in mind, the Dashpaq+ tuner and monitoring device offers you the peace of mind to watch the most important data with the best display on the market. To learn more about the tune levels and power gains available for your vehicle, please click below

 

Pulsar: Re-Engineered for Ram Hemi

The all-new, re-engineered Pulsar for Ram Hemi is here and better than ever! As the only inline module on the market today for performance tuning and feature control without requiring modification to the factory PCM, Pulsar is an excellent option for your Ram Hemi owners. The all-new enclosure design replaces our original case for improved durability, reliability and more modern stylish looks. Along with the new case design, we’ve re-engineered the internal board for increased durability, and performance with the ability to now read and clear diagnostics trouble codes.

  • Adjust power levels on-the-fly (8 total levels) with steering wheel controls
  • Add up to 30hp/30tq (peak gains)
  • Adjust speedometer for tire size and gear ratio changes
  • Enable/disable Multi Displacement System
  • All-new throttle pedal sensitivity mapping for better drivability
  • Improve towing, mileage, and overall drivability
  • Read and clear Diagnostic Trouble Codes (DTC’s), a brand new feature

 

The Pulsar for Ram Hemi is also expanding with all new model years and engine platform

  • 2015-2018 Ram 1500 5.7L (p/n 32451)
  • 2019-2021 Ram 1500 5.7L (p/n 32453)
  • 2015-2018 Ram 2500 6.4L (p/n 32452)
  • 2019-2020 Ram 2500 6.4L (p/n 32454)

 

Learn More About Pulsar for Ram Hemi Here

Save This Holiday Season

Big Savings with Superchips this Holiday Season

From now until December 31st, 2020 you’ll find up to 20% off SRP on our most popular products. We’re ready to close out 2020 and what better way to do that than big sales and discounts for our customers?! Checkout our newest product launches like the expanded coverage to Flashpaq for Jeep® for the 2.0L 2018-2020 Wrangler® JL or our revolutionary Pulsar LT for 2019-2020 GM 1500 trucks. You’ll find discounts across our complete line-up like Flashcal, TrailDash 2, Dashpaq+, Jammer intakes, and LIT leds.

 

Flashcal for Jeep®

Flashcal has been our most popular device for good reason. As a cost effective option that allows tire size and gear ratio adjustments to ensure the most accurate speedometer readings, the Flashcal for Jeep® is a no brainer. With our current holiday savings, there is no better time to outfit your Wrangler JK, JL and Gladiator JT with the best calibration tool on the market. Along with simple tire and gear changes, Flashcal offers a host of user adjustable features to read and clear codes, adjust TPMS settings, disable Auto Start/Stop, lighting and swaybar changes, plus many more.

 

Dashpaq+

The Superchips Dashpaq+ has been the most advanced, user friendly, all-in-one on-dash tuning and monitoring device on the market for years, but that didn’t stop us from making it even better. We’ve added many features, including Backup Camera compatibility and lightning quick response times we just know you’re going to love it! With pre-loaded performance tuning optins for Ford, GM, and Dodge our optimized tuning will offer better drivability, increased mileage, and of course more power!

 

Hoodies for the Holidays

Feeling a little holiday spirit we’ve slashed our hoody prices in half and below our cost! At just $18 how can you resist putting one in your shopping cart and stuffing it under the tree or in that special someone’s stocking hung near the fire? Hurry now while supplies last!

Flashpaq for 2.0L Jeep Wrangler JL

Finally, the performance flash tuning you’ve been begging for! Superchips Flashpaq (P/N 3876-JL) now supports 2018-2020 2.0L Jeep Wrangler JL. The 2.0L turbocharged engine has been a great new option for Wrangler JL owners, offering good fuel mileage and great torque. But aftermarket support for the platform has been limited, until now! Drivability of the 2.0L engine and 8-speed automatic transmission has been great, but of course, our calibration team was able to make it even better with our all-new Flashpaq tuning.

Features:

  • 25hp/20tq Peak Gains
  • 65hp/90tq Max Gains
  • Improved Transmission Shift Strategies
  • Broader Power and Torque Curves
  • Increased Low RPM Performance
  • Better Throttle Response and Turbo Spool-up
  • Eliminates reduced power in 4-Low
  • 87 Octane, 91 Octane, 93 Octane, Crawl Tune
  • PCM Swap Required

 

 

Through extensive development, our team of engineers have worked tirelessly to not only break the PCM coding but to offer even better performance, mileage, and drivability from an already great platform. Not wanting to simply increase boost output, our engineers worked at making multiple changes within the tuning to not only increase peak power and torque, but improve the overall curves, so you get that power and torque sooner. By making changes to the transmission shift strategies, boost curve, timing, and fueling maps the all new Flashpaq tuning will offer better low end power and torque with max gains of 65hp/90ft-lbs torque at 3000 RPM’s. The broader power curves allow for better turbo spool-up, increased mid-range for accelerating in traffic, and the torque you need to keep a bigger set of tires rolling.

Of course, like all our Flashpaq devices, performance tuning isn’t the only advantage here. User’s also have the ability to:

  • Adjust for up to 41” tires
  • Adjust for up to 5.38 gear ratio
  • Enable/Disable TPMS
  • Adjust TPMS Pressure Warnings
  • Adjust Speed and Rev Limiters
  • Enable/Disable Auto Start Stop Function

 

  • 87 Octane – 9hp/11tq
  • 91 Octane – 18hp/22tq
  • 93 Octane – 20hp/25tq
  • Crawl Tune – 18hp/22tq

Like all other 2015+ Jeep models, a PCM Swap and Bypass Module will be required in order to flash performance tuning into the vehicle. Gateway Bypass is included with the Flashpaq device and an unlocked PCM will be shipped to you to trade out your factory PCM.

Order Yours Here

 

*Available for E-Torque and Non E-Torque applications

Flashcal for 2021 Jeep is Here!

Flashcal for Jeep is the industry leader in performance calibration tools for a reason! We are proud to announce Flashcal for Jeep® now supports the 2021 Wrangler® JL and Gladiator JT applications! Superchips has set the standard in the market for Jeep® owners adding upgraded tire and gear packages that need speedometer calibration.  Advanced features paired with ease of use continues to mark Flashcal as one of the most popular and convenient upgrades available for the enthusiast or recreational Jeep® owner.  Flashcal is now available for the 2021 Wrangler® 3.6L and 2.0L Turbo (PN 3571-JL) and 2021 Gladiator 3.6L (PN 3571-JT)!  All of the industry-leading features that have distinguished Flashcal as a leading product in the market are included with today’s release, including auto start/stop, auto park disable, and multiple running light options.

Both devices include a bypass jumper module required for use in JL and JT platforms.  Be sure to review the features and information below.  Enjoy a tremendous product with the new Flashcal coverage for the 2021 Jeep® Wrangler® 3.6L or 2.0L turbo and 2021 Jeep® Gladiator JT 3.6L.

Order yours today!

Trailcal Now Covering 2020 2.0L Jeep® JL

Superchips is pleased to extend Trailcal calibration support for 2020 2.0L Jeep® JL Wrangler® with PN 41051-JL. The Trailcal offers multiple options to adjust for larger tires, read/clear trouble codes, adjust speed limiter, disable Auto Start/Stop and more. Trailcal offers a low cost, easy to use functionality through an in-cab touchscreen monitor that can’t be matched anywhere. If you’ve installed an aftermarket suspension lift and some bigger wheels and tires to your 2020 2.0L Jeep® JL, you’ll appreciate the value you’ll find with Trailcal. Best of all, should you decided to add our industry leading performance tuning for the 2.0L when it becomes available, Trailcal can be updated online for conversion to our popular Traildash 2. No more guessing your speed after plugging in with Superchips and re-calibrating for your new tire size or gear ratio.

Shop Trailcal Now