Superchips is proud to announce expanded coverage to the current Flashpaq 1845 and Dashpaq+ 10601 producs with all-new tuning and calibration features for the 2019-2020 Ford Ranger equipped with the 2.3L EcoBoost engine.
The Flashpaq tuner is the industry’s top-selling handheld performance for good reason. With your budget in mind, Flashpaq offers all the best calibration features and performance programming in an easy to use device. Flashpaq for Ford Ranger will offer adjustability for larger tires and gear ratio changes so your speedometer reads correctly. The device also allows you the ability to adjust your rev limiter, top speed limiter, enable/disable Auto Start/Stop, adjust/disable TPMS, adjust engine spark, adjust engine cooling fan and of course read/clear diagnostic trouble codes.
Looking for a little more our of your tuning experience? Checkout our all-new Dashpaq+ for Ford Ranger which offers all the same great features and tuning found in the Flashpaq, housed inside the industry’s best color touchscreen monitor. Dashpaq+ offers a driving experience like no other with easy to read data at your finger tips. WiFi connection makes internet updates a breeze, and the built-in performance meters allow you to test 0-60 and 1/4-mile times.
On the performance side of things, Flashpaq turns your Ford Ranger into a completely new truck with incredible power gains for the 2.3L EcoBoost engine under the hood. Pre-loaded with our Mileage XS, 87 Octane, Superchips Tow, 91 Octane, and 93 Octane tunes we’ve seen as much as 66-horsepower and 96ft-lbs torque to the tires on our chassis dyno. If you enjoyed driving your Ford Ranger stock, you won’t believe how it’ll drive with our performance tuning installed. With optimized transmission tuning, adjusted throttle pedal feel, and real power you can feel, Flashpaq and Dashpaq+ put the boost in your EcoBoost Ranger.
You read that right. We took our already industry leading touch screen monitoring and tuning device and made it even better. Introducing the next generation Dashpaq+ tuner for gas applications. Looking to continue to set the bar for aftermarket all-in-one tuning devices, the all-new Dashpaq+ offers a full 5″ Color Touch Screen with edge-to-edge swipe technology and the crispest, sharpest display you’ll find anywhere. Our all-new monitor offers a completely redesigned screen and case enclosure that offers a sleeker look and improved performance over our previous generation. Not only is the display sharper, but we’ve increased the resolution for incredible pixel ratios and top of the line graphics. Our gauge screens are easy to read, easy to navigate, and easy to customize to show you the data you want to see from the drivers’ seat. A bigger processer means faster tune downloads and an all-new WiFi update capability, means there is no need to remove the device from the truck when it’s time for updates.
Sleek, state-of-the-art, color touch-screen
Faster and more capable than previous models
Power levels built specific for daily driving, towing, and performance
Up to an additional 86hp, depending on application
Optimized tuning for better transmission performance, including shift firmness, TQ management, and more
Adjust Speed and Rev Limiters*
Simple installation with just one cable for OBD-II connection
Monitor important vehicle parameters like trans temp, boost, RPM, engine coolant temperature and dozens more
Full color, 5” capacitive touch screen with auto-dimming
Offers crystal clear data at your fingertips
Highly customizable gauges and backgrounds
Boots up directly to gauge screen upon key cycle
Swipe capability allows easy switching between screens
Built-in performance meter measures 0-60, ¼ mile times and more
Advanced integrated data logger with export capability
Ability to add vehicle licenses to tune multiple vehicles with one product
Clear and Read DTC codes
Our tuning calibrations offer better throttle response, improved mileage, better towing performance with less downshifting, and of course just all all-around more enjoyable driving experience. Built specifically with daily drivers in mind, the Dashpaq+ tuner and monitoring device offers you the peace of mind to watch the most important data with the best display on the market. To learn more about the tune levels and power gains available for your vehicle, please click below
Taking throttle sensitivity control to an all-new level with Amp’d 2.0! With the industry’s first wireless switch and the all-new downloadable app, Amp’d 2.0 is the most advanced throttle booster available today. Amp’d 2.0 instantly puts you in control of your driving experience. No bulky modules to mount on the dash and no switch wiring to hassle with. Pre-loaded with 5 preset throttle curves and the ability to create thousands of custom curve, your options are endless. Take total control of your driving experience with Amp’d 2.0!
- Sleek Wireless Control Switch
- All-new App for Total Control of Your Driving Experience
- Removes Factory Pedal Lag
- Improve Turbocharger Spool-up
- App is Android/IOS Compatible
- 5 Pre-Set Levels
- Create and Save Your Own Pedal Maps
- Available for Hundreds of Vehicle Applications
- Jeep, Ram, Ford, GM. Cars, Trucks, and SUV’s
- Gas and Diesel Coverage
The best thing for Dashpaq+ since Dashpaq+ is now available for download via our Update Agent software. The Superchips Dashpaq+ has been the most advanced, user friendly, all-in-one on-dash tuning and monitoring device on the market for years, but that didn’t stop us from making it even better. The Superchips engineering team has been busy at work to improve many features, including Backup Camera compatibility within the Dashpaq+ and you’re going to love it. How much are these new features going to cost you? Nothing. Nada. Zip. It’s all available now when you update to the latest version with our Update Agent software.
The all-new updates for Dashpaq+ apply to all Dashpaq+ part numbers, whether you’re running it in a Ford, GM, or Dodge/Ram application. Everyone will benefit from our latest software release through quicker load times, easier navigation, and new gauge displays. Possibly the most exciting news of all is that Dashpaq+ will now support our EAS Backup camera (sold separately, p/n 98203), turning your monitor into a super useful rear-mounted camera display to ease backing into a tight spot or hooking up to that bass boat. Once your updates are complete in Update Agent, it’s also a great time to look into registering your device with Superchips and even extending your device warranty.
All-new backup camera compatibility*
All-new user interface updates
All-new gauge screen layouts
All-new Basic/Advanced Parameter set lists
Faster load times between screens
Faster start-up times
Improved data stability
*Additional EAS Backup Camera kit required
After fourteen years Ford bronco returns and it’s everything we’d ever hoped for! Ford came out swinging and is undoubtedly looking to steal some market share from Jeep® Wrangler®. Question is, have they done enough with this 2021 Bronco to make it happen? Ford’s development team has obviously done their homework and listened to the market in staying true to their original 60’s Bronco roots in styling and with the strength in their EcoBoost engine program, this one should be a winner. Ford’s offering seven different trim packages in either 2-door or 4-door with base prices starting at $28,500 and peaking out at $63,500. With hundreds of combinations they’re bound to be able to build something for just about everyone with a need to see the outdoors in their SUV.
The most exciting part of the 2021 Bronco for us here at Superchips are the available powertrains. With the 2.3L 4-cylinder Ecoboost from Ford Ranger and an optional 2.7L V6 Ecoboost from F-150, we could see some great potential to boost horsepower with our Flashpaq and TrailDash tuning systems here. We currently offer tuning for the 2.7L Ecoboost F-150 and it is a very potent little engine in that platform, should be even more fun in a sporty little Ford Bronco. There are two transmission options depending on which engine you go with, Fords latest 10-speed automatic with Trail Control and an all new 7-speed manual for your clutch lovers. Interestingly enough, if you opt for the manual, a dedicated ‘Crawler’ gear was figured in to the equation which should make for a great rock crawler.
Like the Jeep® Wrangler® it’s trying to defeat for market share, the 2021 Bronco offers some incredibly cool off-road features.
- Removable doors and top
- Locking differentials with up to a 4.70:1 gear ratio
- Advanced 4×4 with auto engagement
- Rock rails, high clearance fenders and heavy duty bumpers
- New Terrain Management System with seven G.O.A.T modes
- Auxiliary power switches
- Optional marine grade washable interior with built in floor drains.
- Industry first optional 35″ tire size
- Stabilizer bar disconnect
Ford’s press site states that 2021 Bronco orders can start being placed right away, but that delivery to dealerships won’t be happening until Spring/Summer of 2021. So while we’re all super excited to see this new Ford Bronco it will still be a while before anyone will get behind the seat of one. Rest assured though, the Superchips team has already narrowed down the choices and picked out the model that will be perfect for our team to get started on product development so we can start offering aftermarket support as soon as possible.
Superchips is pleased to extend coverage of our popular Flashpaq, Dashpaq, and Dashpaq+ for all 2020 Ford F-150. With up to an additional 86HP these simple to use tuners offer everything an F-150 truck owner needs. New tuning support offers performance tunes for 87 Octane, 91 Octane and 93 Octane with improved transmission strategies for both 6-spd and 10-spd models. In addition to impressive power levels, the features and options built in continue to mark the Superchips product line as one of the most sought after tools for increased power at your fingertips. With full control over exciting user-adjustable selections including gear options, speed/rev limiter, shift firmness and more. Dashpaq and Dashpaq+ offer in-cab high resolution color screens that give you all the information you’ll ever need without leaving the drivers seat. Equip your 2020 Ford F-150 with Superchips tuning today
2020 F-150 Tuning Features:
- Up to 86hp and 63tq for 3.5L Ecoboost
- Up to 49hp and 62tq for 5.0L V8
- Up to 42hp and 73tq for 2.7L Ecoboost
- Unique Transmission Shift Strategies for Normal, Sport and Towing Modes
- Pre-loaded tuning for 87 Octane, 91 Octane, 93 Octane, Towing and Mileage
- Adjust for up to 4.56 gear ratio
- Enable/Disable TPMS
- Adjust TPMS Pressure Warnings
- Adjust Speedometer for 28-40” Tire Size
- Adjust Speed and Rev Limiters
- Enable/Disable Auto Start Stop Function
Superchips is pleased to extend Flashcal calibration support for 2020 F-150 with PN 1545. The Flashcal for Ford trucks offers multiple options to adjust for larger tires, read/clear trouble codes, adjust speed limiter and more. This latest release covers the 2.7L and 3.5L Ecoboost, along with the 5.0L V8 engine platforms. Flashcal offers a low cost, easy to use functionality that can’t be matched anywhere. Configure your 2020 F-150 and shop today!
- Corrects speedometer for tire upgrades between 28″ – 40″
- Speedometer re-calibration for gear changes (3.15-4.56)
- TPMS disable/enable
- TPMS adjust 1-90 psi
- Auto start/stop disable
- Reads and clears diagnostic trouble codes
- Real-time data logging
- Real-time data monitoring
If you’ve installed an aftermarket suspension lift and some bigger wheels and tires to your 2020 F-150, you’ll appreciate the value you’ll find with Flashcal for Ford trucks. No more guessing your speed after plugging in with Superchips and re-calibrating for your new tire size or gear ratio. Click here to learn more about Flashcal for your 2020 F-150
Superchips is now offering Free Ground Shipping on orders until April 30th. Do you expect an abnormal amount of extra time on your hands for the next few weeks? Maybe the best way to self quarantine is out in the garage, working on that project you’ve just never been able to make time for. Whether you’re looking to add some horsepower with our feature packed Flashpaq, Dashpaq, or TrailDash2 color touch screens or wanting to light up a night run on the trail with our LIT LED light bar kits, we’re offering free ground shipping on all products. Don’t forget our full line of Jammer cold air intakes and Amp’d Throttle Boosters too!
For more information on what parts we offer specific for your ride, Click Here
You can also checkout our YouTube channel for all sorts of videos with Install Tips, Dyno Data, Product Descriptions and more!
Superchips is pleased to extend coverage for 2017-2019 Ford SHO Taurus for the Dashpaq+ (PN 10601) with up to an additional 70HP. New tuning support offers performance tunes for 87 Octane, 91 Octane and 93 Octane for the 3.5L Ecoboost engine in 2013-2019 SHO platforms. In addition to impressive power levels, the features and options built into the Dashpaq+ continue to mark the Superchips product line as one of the most sought after tools for increased power at your fingertips. With full control of over exciting user-adjustable selections including gear options, speed/rev limiter, shift firmness and more the in-cab high resolution color touchscreen gives you all the information you’ll need. Configure your 2017-2019 SHO Taurus and shop today!
- Adds up to 70 HP and 70 lb-ft TQ
- Adjust Rev Limiter
- Adjust Speed Limiter
- Modify Transmission Shift Strategies
- Pre=loaded tuning to include maximum performance for 87 Octane, 91 Octane, and 93 Octane
- Accepts custom tunes from CMR
Turn that 4-door sedan SHO Taurus into a full blown street monster. Let that 3.5L Ecoboost reach it’s full potential with the addition of our Dashpaq+