Page not found - Superchips

TrailDash2 for JT Gladiator - 42051-JT

Suggested retail: $703.00
Your Price: $631.95
  • **DUE TO GROWING DEMAND AND INCREASED ORDER ACTIVITY, PLEASE ALLOW FOR 1 TO 2 ADDITIONAL DAYS FOR SHIPMENTS.**

    ALL SHIPMENTS TO CANADA ARE SUBJECT TO BROKERAGE FEES. ORDERS ARE SHIPPED MONDAY-FRIDAY. ANY PRODUCT ORDERED AFTER 2:00 PM MST OR ON S
    Overview
    Product Details
    Features
    Emissions

    Saves factory setting and returns easily to stock

    The most versatile performance programmer and on-dash monitor on the market today for Jeepis now equipped with 2018 JL Wranglercoverage! TrailDash2 PN 42051-JL is a PCM swap SKU that includes our bypass module. The TD2 delivers tremendous power paired with the innovative gauges and screen layouts to manage, monitor, and enjoy the driving experience. In addition to being first to market, with pre-loaded programming for the 2018 JL Wrangler, Superchips is pleased to continue extending the most meaningful options and expandability all in one, on-dash device. Remember, the 2018 JL Wranglerdoes require a PCM process and a unique set of steps required before tuning. It is extremely important you review and understand the steps required before you enjoy the tremendous power and functionality now available for the JL Wranglerwith TD2 PN 42051-JL.

    Jeep Gladiator TrailDash2 PN 42051-JT

    Security Bypass Install & PCM Swap Process

    Installing an Unlocked PCM

    Steps 1 & 2 Reading the factory PCM

    1.Install the provided Security Bypass Module. Follow instructions in manual

    2.With Factory PCM still installed, connect your TD2 to Vehicle.*

    a.Select Tune

    b.Select Tune Vehicle

    c.Screen will display:

    i.Establishing Communications

    ii.Gathering Data from Factory ECU. Please Wait

    iii.Successfully Retrieved Data from Factory ECU! Proceed to website and follow PCM swap instructions online to request your unlocked PCM. You will need to receive your unlocked PCM before proceeding with any additional steps. Refer to your install guide for additional instructions

    *Please note, upon connecting your TD2, you may be presented with an alternate screen that indicates the following:

    Product update required. This vehicles tuning is unrecognized. You must update this device using the update software in order to program the vehicle. This product will need to read and save the vehicles stock tuning first. This process will take several minutes. Touch screen to continue

    *This is normal and pressing continue will allow the device to continue reading your stock file.

    After completing steps 1 & 2, you will need to proceed to www.superchips.com and update your device. Navigate to the update tab and then proceed to the Fusion update tool and connect your TD2. Next, proceed to https://superchips.com/pcm-ship/ to submit your vehicle information and request and unlocked PCM. Proceed with the steps below only after receiving your unlocked PCM from Superchips.

    Steps 3 5: Installing Unlocked PCM and Installing a Tune with the TD2

    3.Turn Ignition Off. Disconnect Tuner. Disconnect Battery.

    4.Remove Factory PCM (10mm) and Install Unlocked PCM. Connect Battery.

    5.With Unlocked PCM installed, connect TD2 to Vehicle.

    a.Navigate to Performance Menu option from pull up menu

    b.Select a performance tuning level

    c.Tuner will read PCM and continue tuning your vehicle. You will need to follow device screen prompts from this point forward.** (When prompted for Ignition ON, be sure double tap on push start and check to see run illuminated on push start itself)

    On first power up with an Unlocked PCM, the cluster panel will illuminate the red security light and may warn about other module errors (Traction Control, ABS, etc.). This is not abnormal and part of the process.

    When you begin to tune and are prompted to turn the Ignition On, the cluster panel should no longer have the red security light illuminated which signals that your JL has been programmed, and connected, to the Unlocked PCM.

    After installing your tune, start the vehicle. Let the vehicle run for more than 3 seconds, and test throttle response. The vehicle shutting off after ~3 seconds, or having a dead pedal indicates that there was an issue reading stock data and/or writing stock data to unlocked PCM. If throttle response is good and vehicle stays running, please continue by shutting off engine, returning ignition to ON.

    You must configure your vehicle to view Product Features

    This part is legal under the provisions of EPA’s memorandum 1A. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA Memorandum 1A. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status

    TrailDash2 for JT Gladiator is rated 5.0 out of 5 by 1.
    Rated 5 out of 5 by from Love this programmer This is my third jeep and my third TD2, it is by far the easiest setup, most versatile programmer I’ve found. The gauges are easy to read and the flexibility of options are amazing
    Date published: 2021-03-05
    • y_2021, m_4, d_10, h_17
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.14
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_1
    • loc_en_US, sid_42051-JT, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_superchips
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 29.78ms
    • REVIEWS, PRODUCT

    Will this fit 2021 gladiator?

    Asked by: Derekt1034
    We have not released coverage for the 2021 model year yet, but it is in development. We have our Flashcal available now, but have not finished up performance tuning testing.
    Answered by: Jacob W
    Date published: 2021-04-05

    How long does it typically take to get the PCM back after you receive it. 

    Asked by: JordanK23
    Jacob W i bought this and didnt recieve the PCM. With the purchase. After research I find that I have to send all the info to you guys Via the website then you guys send me an unlocked one. Is this correct? Just making sure I didnt miss somenthing.
    Answered by: JordanK23
    Date published: 2021-03-19

    I have a 42051 2020 JT Jeep TrailDash2, planning on mods described at: https://www.jeepgladiatorforum.com/forum/threads/how-to-get-20mpg-on-37’s-ecu-basics-5-5-up.40316/ Will the TrailDash2 do the same as the Pulsar used in this this thread?

    Asked by: Jtschnel
    The TrailDash 2 will do many of the same features as the Pulsar, but they do interact with the vehicle differently. The tuning itself is different as well, but we have many happy customers running both options.
    Answered by: Jacob W
    Date published: 2021-02-16

    Will this void my factory warranty?

    Asked by: Joe R
    Hey Joe- Please visit our Warranty page on our website for more information regarding that subject matter. https://superchips.com/will-tuning-void-my-warranty/
    Answered by: Jacob W
    Date published: 2020-11-02
    • y_2021, m_4, d_10, h_17CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.14
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_4
    • loc_en_US, sid_42051-JT, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_superchips
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 44.2ms
    • QUESTIONS, PRODUCT