PULSAR for 2019-2022 Ram 1500 5.7L Hemi - 32453

Suggested retail: $627.00

Your Price: $592.15

Qty:

-OR- -OR-

**DUE TO GROWING DEMAND AND INCREASED ORDER ACTIVITY, PLEASE ALLOW FOR 1 TO 2 ADDITIONAL DAYS FOR SHIPMENTS.**

ALL SHIPMENTS TO CANADA ARE SUBJECT TO BROKERAGE FEES. ORDERS ARE SHIPPED MONDAY-FRIDAY. ANY PRODUCT ORDERED AFTER 2:00 PM MST OR ON S

Overview

Product Details

Features

Support

Emissions

2019-2022 RAM 5.7 HEMI performance has arrived! Engineered to keep your factory PCM on the truck with no flash tuning or unlock required. Pulsar is an in-line computer that connects directly to the vehicle PCM, with no additional wiring harness (do we have your attention yet?!).

FEATURES

User-adjustable power levels via cruise control buttons

Adjustable power levels on-the-fly

Improves economy, towing capabilities, and performance

Up to 8 performance levels

Tire Size options 20" - 59"

Gear Ratio options 2.00 - 5.99

Power level displayed on OEM dash

Adds up to 30 HP and 30 ft-lbs TQ

Advanced ignition timing (spark)

User-selectable MDS on/off

Adjusts accelerator pedal response

You must configure your vehicle to view Product Features

Resources:

Ram Hemi Pulsar Manual

This part is legal under the provisions of EPA’s Tampering Policy dated November 23rd, 2020. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and the EPA Tampering Policy. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status

PULSAR for 2019 Ram 1500 5.7L Hemi is rated 4.5 out of 5 by 20.

Rated 1 out of 5 by Khram2019 from Unhappy So far I cannot update by computer, tried the update agent 1.0 for windows, tried to register my Pulsar, serial # is not marked on product as serial number, which numbers do you want ? Installed in truck, computer with update agent will not recognize its installed, have had a couple times truck died at a stop sign, then acted up again, not sure I'm very happy yet.

Date published: 2019-06-20

Rated 5 out of 5 by Azcerteng from Works as promised I bought this about a month ago and installed it on my 2020 Ram 1500, 5.7 hemi. I bought it primarily for towing my enclosed 26 foot car hauler, with a 64 Plymouth Savoy Super Stock car, total weight about 9000 lbs. I was getting 6 MPG at anywhere from 65 to 70 MPH without it, I have the 3.92 rear gear. After towing with it for a 300 mile round trip I recieved 9 MPG at 70 MPH, 10 MPG at 55 MPH. Great increase and I'm not dialed in yet on the sweet spot of MPH, need to test between 65 and 70 MPH in one mile per hour increments. Over all I'm really pleased and would recommend it for the Ram 1500, hemis. I tried the performance mode with out a trailer and could break loose the rear tires. The economy mode added about 6 miles per gallon under 55 MPH. I need to find out what the MDS off mode will do, I really don't understand what it's supposed to do.

Date published: 2021-06-19

Rated 5 out of 5 by Mikey1 from Performs better than advertised. You will not be dissatisfied with the chip. Super easy to install and the ability to change settings on the fly is awesome. Headed down highway, switch to economy. Pull into to town and need to show some muscle at the red light, switch to performance mode. This is the best chip I have ever installed.

Date published: 2018-09-27

Rated 5 out of 5 by Harley 15 from Wow! Got this month ago,and made hugh difference in power,easy to use and install,put this on my brand new truck and glad i did,

Date published: 2019-02-25

Rated 4 out of 5 by Eastin357 from Easy power for the money. The only negative thing I have to say is. When you are driving down the freeway the mds kicks on for a blink of an eye then the pulsar shuts it off. So I always have to hear the engine fluctuate in rpm every 3 seconds. So I have to do my normal trick and put the gear selector to 8th so the mds stays off. Other the. That it really wakes the truck up. You can feel the power difference in every mode and the throttle gets more touchy as you go up in power so be careful.

Date published: 2018-12-07

Rated 1 out of 5 by Harry Banatte from DO NOT USE THIS PRODUCT!!!!!!!!!! After having this tuner installed in my 1500 2020 Ram. Im now having problems with transmission shifting correctly! I have many codes that are stuck in my computer. Service Electronic stability control message comes on and I have to turn off my vehicle then back on inorder to move. No one has returned my call. My truck is brand new just hit 25 thousand miles.

Date published: 2021-06-02

Rated 5 out of 5 by Wags78 from Awesome!! The best tuner I’ve ever had!! Works awesome and a big difference in power and throttle response!!!! Highly recommended!!!

Date published: 2018-11-27

Rated 5 out of 5 by Williamtb from Great performance gains Very easy install! Unbelievable difference in performance mode. I couldn’t be happier!!

Date published: 2018-12-24

PULSAR for 2019 Ram 1500 5.7L Hemi Reviews - page 2

Do you have to update with windows laptop before install? I currently only own Apple MacBooks therefore would want this to just install and be done. 

Asked by: Bobsterc34

It's very rare that a Pulsar has to be updated, and can typically be installed as it is right out of the box.

Answered by: Mike M

Date published: 2021-12-14

I'm looking for a pulsar for my ram, it's a 2021 1500 classic, I've been told to get one for the 2018, and also been told that the classics have the same computer as the new body style so get one for the 2021 new body.... can anyone help??

Asked by: JustinSTJ

For your 2021 Classic, you'll need part number 32453

Answered by: Jacob W

Date published: 2021-10-22

Will this unit allow for raising or disabling the speed limiter?

Asked by: r4back

Speed Limiter will need to be done through programming, so look into our Flashpaq or Dashpaq+ devices for your model year truck.

Answered by: Jacob W

Date published: 2021-09-21

Has this been updated yet to cover 2021 Ram 1500 5.7L with Etorque to allow speedometer calibration for larger tires without disabling the parking sensors?

Asked by: Drew72

Right now, our unit will allow you to adjust up to 1" over the stock value without issue. Unfortunately, the Ram's ECM won't support changing any larger and there is not currently a resolution for that.

Answered by: Jacob W

Date published: 2021-08-30

How do I update my Pulsar PN 32453? I bought it in December 2019 and I'm having lots of issues. Dashboard light up like a Christmas tree, accelerator stops working, gears don't change. Please help

Asked by: Hilder

Please contact our tech support team at 888-227-2447, they'll get you taken care of.

Answered by: Jacob W

Date published: 2021-08-19

I have a Pedal Monster in my Ram 1500 Hemi. Will this work with it or will there be a conflict?

Asked by: Jay1975

The devices should work together, however the Pulsar module has throttle sensitivity adjustment as well, so there would be no need for the other device.

Answered by: Jacob W

Date published: 2021-07-20

i tow a 29' trailer with my 2020 REBEL, but when i'm not towing will my msd mode still work? Also does this void factory warranty?

Asked by: chuckster

The Pulsar offers the option to run MDS Enabled/Disabled at any time. As for warranty, it shouldn't but we always suggest removing it for dealer service.

Answered by: Jacob W

Date published: 2021-07-20

i tried to update this and I have also noticed several "Bugs" in other components in the software of the truck like the Auto AC isn't functioning correctly and little things like that. You need this USB to OB to update while it is in the vehicle but which

Asked by: Natedawg

How many miles has the vehicle been driven since update/install? It will take some time for the other modules in the vehicle to sync with the ECM changes. If you have continued issues, please contact our tech support team.

Answered by: Jacob W

Date published: 2021-07-12

PULSAR for 2019 Ram 1500 5.7L Hemi Questions - page 2

PULSAR for 2019-2022 Ram 1500 5.7L Hemi - 32453

Do you have to update with windows laptop before install? I currently only own Apple MacBooks therefore would want this to just install and be done.&nbsp;

I'm looking for a pulsar for my ram, it's a 2021 1500 classic, I've been told to get one for the 2018, and also been told that the classics have the same computer as the new body style so get one for the 2021 new body.... can anyone help??

Will this unit allow for raising or disabling the speed limiter?

Has this been updated yet to cover 2021 Ram 1500 5.7L with Etorque to allow speedometer calibration for larger tires without disabling the parking sensors?

How do I update my Pulsar&nbsp;PN 32453? I bought it in December 2019 and I'm having lots of issues. Dashboard light up like a Christmas tree, accelerator stops working, gears don't change. Please help

I have a Pedal Monster in my Ram 1500 Hemi. Will this work with it or will there be a conflict?

i tow a 29' trailer with my 2020 REBEL, but when i'm not towing will my msd mode still work? Also does this void factory warranty?

i tried to update this and I have also noticed several &quot;Bugs&quot; in other components in the software of the truck like the Auto AC isn't functioning correctly and little things like that. You need this USB to OB to update while it is in the vehicle but which

Do you have to update with windows laptop before install? I currently only own Apple MacBooks therefore would want this to just install and be done.

How do I update my Pulsar PN 32453? I bought it in December 2019 and I'm having lots of issues. Dashboard light up like a Christmas tree, accelerator stops working, gears don't change. Please help

i tried to update this and I have also noticed several "Bugs" in other components in the software of the truck like the Auto AC isn't functioning correctly and little things like that. You need this USB to OB to update while it is in the vehicle but which