Page not found - Superchips

Flashpaq F5 for 2019-2020 RAM 1500 5.7L HEMI Engine (8-speed only) - 3846-S1

Suggested retail: $556.00
Your Price: $499.95

    Product Details

    Saves factory setting and returns easily to stock

    Item in stock

    Note: PN 3846-S1 supports 8-speed transmission tuning only. The Flashpaq performance tuner is considered one of the most popular and easy to use handheld programmers on the market. Flashpaq is powerful and adds a whole new element to your driving experience in just a few minutes. Now, Flashpaq supports 2019-2020 Ram 1500 New Body 5.7L Hemi engines with the 8-speed transmission. This support is delivered with the tried and tested PCM swap program that Superchips developed with ease and simplicity in mind. Superchips has designed a quick and easy solution that makes tuning these difficult trucks a breeze as Superchips takes care of everything. Be sure to refer to your instruction manual to install required cable prior to using. Review PCM swap options below get your 2019-2020 Ram 1500 5.7L tuned and running Superchips Equipped!

    PCM Swap Options

    Option 1: Cross-ship PCM swap (subject to availability of PCMs)

    After you receive your 3846-S1 Flashpaq, get your vehicle VIN, calibration ID, and your product in hand and go to Once you proceed, you will need to set up a PCM shipment and the included pre-authorization to secure that shipment. This process is all online and very simple. After setting up this process, you will receive an unlocked PCM that is pre-programmed with all of your vehicle details so you can swap it with your current PCM in minutes. This process is 100% free as long as you return your stock PCM as part of the swap process.

    Option 2: Send in your factory PCM to be unlocked

    This free service will be available to you anytime. Please contact technical support to begin. Once we receive your stock PCM, we will quickly unlock it and get it back to you so you can tune with your Flashpaq. This typically takes 2-3 business days to turnaround once we receive your PCM.

    You must configure your vehicle to view Product Features

    This part is legal under the provisions of EPA’s memorandum 1A. The company has reasonable basis (test results) to verify that this product allows the vehicle to operate within legal emissions standards and is therefore legal to be sold for on-street use in all states that accept the legal provisions of the Clean Air Act and EPA Memorandum 1A. This product is NOT LEGAL FOR SALE OR USE IN THE STATE OF CALIFORNIA. Testing with the California Air Resources Board, in order to achieve 50-state compliance, is pending with CARB. Once testing is complete with California, and an E.O. number is issued, this product will be updated to 50-state legal status

    WARNING: This product is currently being tested with the California Air Resource Board and does not have an EO (Executive Order) number at this time. The product is not available for sale or use on pollution controlled vehicles in the state of California.

    Flashpaq F5 for 2019 RAM 1500 5.7L HEMI Engine (8-speed only) is rated 4.0 out of 5 by 3.
    Rated 5 out of 5 by from Very Impressed I installed the Flashpaq in my Dodge Ram Rebel about 3 weeks ago. I was a bit skeptical about seeing any real results, but I have to say I'm pleasantly surprised. My truck's acceleration is noticeably faster, not just from a complete stop, but accelerating to overtake on the highway as well. I even can tell my truck's shifting is smoother as well.
    Date published: 2020-08-03
    Rated 2 out of 5 by from 2020 Ram 1500 with e-torque 2020 Ram 1500 Laramie Longhorn with ETQ - Also added a K&N cold air intake. Instructions were only okay... Clearly trying to avoid re-doing them for each vehicle, so they just assume you'll be fine with what they provide. Lazy. Once finally done on the install, including PCM swap, I was surprised to note that half of my vehicle options did not show up. After a call to support, and a few restarts later, they did. I'm still having some issues with my tow sensor automatically determining the trailer length as it did stock. So far, it hasn't even noticed there is a trailer. I haven't called back yet because I'm tired of sitting on hold forever. Transitioning between tunings takes a few minutes. Not seamless by any means and requires you to be active in it. That surprised me. In performance, I definitely noticed a smoother shifting pattern and a better acceleration. Mileage, not so much. In tow, I haven't noticed any benefit so far that I can notice. Perhaps it's there, but it isn't easily noticed. I'm going to keep on playing with that. So far, I think it's a waste of money and am unimpressed. Wish I had spent the money somewhere else. Certainly don't see any value here.
    Date published: 2020-08-03
    Rated 5 out of 5 by from You Guys are they Best!!!!!! The Flashpaq for the 2019 Ram1500 are Awesome made my Ram pickup even more powerful and fun to drive so you guys will not waist your money on this product I Love it and the have the Greatest help line that I have ever called great support
    Date published: 2020-02-29
    • y_2020, m_8, d_8, h_15
    • bvseo_bulk, prod_bvrr, vn_bulk_3.0.10
    • cp_1, bvpage1
    • co_hasreviews, tv_0, tr_3
    • loc_en_US, sid_3846-S1, prod, sort_[SortEntry(order=RELEVANCE, direction=DESCENDING)]
    • clientName_superchips
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 5.21ms

    Will this work with the 5.7 etourque hemi? 2020 model year

    Asked by: Grant1971
    Yes. I just added it to mine.
    Answered by: TheChooch
    Date published: 2020-08-04

    Can I adjust the shift firmness and timing with this product?

    Asked by: Bkelly
    • y_2020, m_8, d_9, h_16CST
    • bvseo_bulk, prod_bvqa, vn_bulk_3.0.10
    • cp_1, bvpage1
    • co_hasquestionsanswers, tq_2
    • loc_en_US, sid_3846-S1, prod, sort_[SortEntry(order=LAST_APPROVED_ANSWER_SUBMISSION_TIME, direction=DESCENDING)]
    • clientName_superchips
    • bvseo_sdk, p_sdk, 3.2.1
    • CLOUD, getContent, 4.77ms