Flashcal for JL Wrangler - Now Shipping!

First to Market


Flashcal for 2018 JL - Now Shipping!

It’s here! The Flashcal for JL Wrangler is first, and BEST, to market. Wrangler JL owners need the tire and gear options Flashcal provides. Enjoy seamless functionality to accommodate the lift, suspension, and tires you’ve installed on your JL. Superchips has loaded the Flashpaq PN 3571-JL with the most sought after features! Configure your JL to review all product features. Be sure to pay close attention to your install guide. The team at Superchips spells out how to install your Flashcal to take advantage of tire size, gear ratio, and more. Enjoy the ride with the Flashcal for JL Wrangler.

Flashcal for JL Wrangler Features:

  • Tire Size Adjustment: 25” – 40”
  • TPMS On/Off (Remove Dash Screen)
  • Gear Ratio Adjustment: 2.73, 3.07, 3.21, 3.55, 3.73, 4.10, 4.56, 4.88, 5.13, 5.38
  • Transfer Case Low: 2.72, 3.00, 3.80, 4.00, 4.10, 4.30, 5.00
  • Sway Bar Disconnect in 2HI (up to 25 MPH, disconnects sway bar)
  • One Touch Lane Change On/Off
  • Fog Light Dropout On/Off
  • Daytime Running Light Dropout On/Off
  • Auto Park On/Off (live feature)
  • Auto Start/Stop (refer to user manual)
  • Reads & Clears Diagnostic Trouble Codes
  • Daytime Running Light Location
    • High Beam
    • Low Beam
    • Turn Signal
    • Fog Lights
    • European / Fender Lights

Install and Enjoy the Ride

Installing your Flashcal for JL includes a new jumper module.  Be sure to follow your instruction manual for step by step directions prior to enjoying your tire and gear adjustment functions.  Install is easy and will have you up and running in just minutes!

Flashcal for JL Wrangler

Additional features now Available:

Jeep JL Flashcal v2.0 – Feature Update

*********************************************************************************************
Running Options Menu

Non-permanent settings that return to stock when the tuner is unplugged and/or the user exits the options menu and/or a key cycle occurs.

*********************************************************************************************

Feature: Engine Idle Up

Customer Options:

Range from 700 RPM up to 2000 RPM. Increments of +/- 100 RPM per button press.

What it does:

Once the user selects an RPM value the Flashcal sets and maintains that engine RPM value until the user

exits the menu or unplugs the device.

Feature: Sway Bar Unlock

Customer Options:

Unlock / Exit

What it does:

When the user selects “Unlock” the Flashcal will force the sway bar to disconnect, regardless of drive mode (2H,4H,4L) and hold it in a disconnected state unless the vehicle exceeds 25 MPH or until the user selects Exit or disconnects the Flashcal.

Factory settings allow the driver to disconnect in 4H and 4L drive modes only and will lock it back if the driver exceeds 17 MPH, shifts into Park, and/or switches to 2H drive mode.

Feature: Line Lock

Customer Options:

Lock and Hold / Exit

What it does:

On selection of “Lock and Hold” prompts the driver “To Engage, Firmly Pump Brakes until Hard” for 4 seconds then switches screens to “Line Lock ACTIVE. Press OK to Cancel”.

This action will lock the front brakes and hold them locked until the user presses OK on the device or unplugs the Flashcal.

Feature: Rock Crawl Lock

Customer Options:

Lock and Hold / Exit

What it does:

On selection of “Lock and Hold” prompts the driver “To Engage, Firmly Pump Brakes until Hard” for 4 seconds then switches screens to “Rock Lock ACTIVE. Press OK to Cancel”.

This action will lock the front and rear brakes and hold them locked until the user presses OK on the device or unplugs the Flashcal.

Feature: Auto Park Disable

Customer Options:

None

What it does:

On the selection of “Auto Park Disable” displays “Auto Park DISABLED. Hold OK to Cancel”.

This will disable the Auto Park feature for the duration of the Key cycle and/or until the Customer presses “OK” on the F5 to cancel.

*********************************************************************************************

Vehicle Configuration Menu

*********************************************************************************************

Feature: Tire Size

Customer Options:

selection list from 25 inches to 40 inches with .25 inch resolution.

What it does:

Updates the stored tire size in the vehicle which is used to determine Vehicle speed, gas mileage, etc.

Feature: Gear Ratio

Customer Options:

2.73, 3.07, 3.21, 3.55, 3.73, 4.10, 4.56, 4.88, 5.13, 5.38

What it does:

Updates the stored gear ratio in the vehicle which is used to determine Vehicle speed, gas mileage, etc.

Feature: Transfer Case Low Gear Ratio

Customer Options:

list of available standard gear ratio options

What it does:

Updates the stored gear ratio in the vehicle which is used to determine Vehicle speed, gas mileage, etc.

Feature: TPMS Warning Threshold

Customer Options:

selection list from 22 psi to 56 psi, integer increment resolution.

What it does:

Adjust the Tire Pressure Monitoring System to warn the driver when any of tires drop below the selected psi value.

Feature: TPMS On/Off

Customer Options:

Enable / Disable

What it does:

Disable:

Removes TPMS screen from the Vehicle Info Screens located in the Instrument Cluster Panel.

Removes the Yellow Low Tire Pressure warning light on the Instrument Cluster Panel.

Enable:

Returns all screens and lights related to TPMS back to factory settings.

Feature: Daytime Running Lights

Customer Options:

Always On

Selectable

No DRL

What it does:

This setting makes changes to the way the Light Selection knob works.

Always On:

Even when the knob selection in the OFF position, the DRL remain on while the vehicle is running.

Selectable:

“Stock” setting. DRL off on knob OFF selection. DRL on while the knob is in the running light position. DRL fender lights off Headlights on for knob on Headlight selection.

No DRL:

DRL fender lights remain off regardless of knob selection.

Feature: DRL Location

Customer Options:

No Running Lights

High Beams

Low Beams

Turn Signals

Fog Lights

Fender Lights

What it does:

No Running Lights:

Turns off/ Keep off the JL fender lights regardless of DRL switch selection.

High Beams:

Switches Running lights to the High Beams. Requires user to flash high beam switch to fully enable this feature.

Low Beams:

Switches Running lights to the Low Beams.

Turn Signals:

Switches Running lights to the Amber Turn signals on the fender of the JL.

Fog Lights:

Switches Running lights to the Fog lights.

Fender Lights:

“Stock” JL setting. White Lights on the fender as the Running Lights.

Feature: DRL Dropout

Customer Options:

Enable / Disable

What it does:

This feature is active when the DRL location is stock and ON and the Driver is using their Turn Signal.

Enable DRL Dropout:

When enabled the White fender light turns off for the duration of the turn/Amber signal being active.

Disable DRL Dropout:

When disabled the White and Amber fender lights alternate on/off states for the duration of the turn signal is active.

Feature: Fog Light Dropout

Customer Options:

Enable / Disable

What it does:

This feature is active when the vehicle lights and fog lights are ON.

Enable:

When the High beams are activated the Fog lights turn OFF.

Disable:

When the High beams are activated the Fog lights remain ON.

Feature: Halo Lights

Customer Options:

Enable / Disable

What it does:

Enable:

Turns the headlight Halo lights ON.

Disable:

Turns the headlight Halo lights OFF.

Feature: One Touch Lane Change

Customer Options:

Enable / Disable

What it does:

Changes the turn signal characteristics on a quick touch of the turn signal switch.

Enable:

Will cause the turn signal to flash 3 times automatically.

Disable:

Will cause a quick flash of the turn signal.

Feature: Seat Belt Minder

Customer Options:

Enable / Disable

What it does:

This feature is active while the vehicle is underway and the driver/passenger is unbuckled.

Enable:

The vehicle makes an audible dinging to remind driver to buckle up.

Disable:

The vehicle does not make the audible dinging.

Feature: Travel Link Weather Warnings

Customer Options:

Enable / Disable

What it does:

Enable:

Turns ON SiriusXM Weather pop-ups and SiriusXM Traffic information.

Disable:

Turns OFF SiriusXM Weather pop-ups and SiriusXM Traffic information.

Feature: Splash Screen

Customer Options:

Sport / Sahara / Rubicon

What it does:

Changes the startup splash screen displayed on the Instrument Cluster Panel on vehicle start.

Sport:

Displays the Wrangler splash screen.

Sahara:

Displays the Sahara splash screen.

Rubicon:

Displays the Rubicon splash screen.

Feature: Standard / LED Light

Customer Options:

Front Turn / Tail Lights / CMHSL

What it does:

Front Turn:

Standard: Adjust vehicle configuration for use with standard Front Turn / Fender Lights

LED: Adjust vehicle configuration for use with LED Front Turn / Fender Lights

Tail Lights:

Standard: Adjust vehicle configuration for use with standard Tail Lights

LED: Adjust vehicle configuration for use with LED Tail Lights

CMHSL:

Standard: Adjust vehicle configuration for use with a standard 3rd Brake Light

LED: Adjust vehicle configuration for use with a LED 3rd Brake Light

Feature:

Auto Stop/Start (ESS)

Customer Options:

Enable / Disable

What it does:

Enable:

Returns Auto Start/Stop screen and Hood Ajar warnings to Cluster Panel.

Disable:

Removes Hood Ajar monitoring and Remove Auto Stop/Start Info screen from Instrument Cluster Panel.

* Will cause the “Service Auto Stop-Start system” screen to pop up occasionally as well as the AutoSS service symbol to be displayed above the Fuel Gauge.

*********************************************************************************************

Add / Remove Modules Menu

*********************************************************************************************

Feature: Auxiliary Switches

Customer Options:

Enable / Disable

What it does:

Enable:

Adds the Auxiliary switch settings screen to the Integrated Center Stack.

* User will need to add the Stock JL Auxiliary switches for this configuration update to work.

Disable:

Removes the Auxiliary switch settings screen from the Integrated Center Stack.

Feature: Towing Package

Customer Options:

Enable / Disable

What it does:

Enable:

Configures the vehicle for trailer tow package.

* May require the user to add trailer wiring harness?

Disable:

Removes the trailer tow package vehicle configuration.

Feature: Blind Spot Detection Add Only

Customer Options:

Enable / Disable

What it does:

Enable:

Configures the vehicle for Blind Spot Detection monitoring.

* Requires user to add blind spot detection mirrors.

Disable:

Removes the blind spot detection vehicle configuration.

Feature: Sway Bar System

Customer Options:

Enable / Disable

What it does:

Enable:

Configures the vehicle for use with the Automatic Sway Bar System.

Disable:

Removes the Automatic Sway Bar System vehicle configuration.

Feature: Cargo Camera

Customer Options:

Enable / Disable

What it does:

Enable:

Configures the vehicle for use with a “Cargo” Camera input/2nd customer mounted camera, adds cargo camera selection to Integrated Center Stack.

* Requires a special harness to connect camera to UConnect system.

Disable:

Removes the Cargo camera selection from vehicle configuration.

Feature: Backup Camera

Customer Options:

Enable / Disable

What it does:

Enable:

Adds Backup Camera Selection Screens/Monitoring to vehicle configuration.

Disable:

Removes the Backup Camera Selection Screens/Monitoring from vehicle configuration.

Feature: Electronic Steering Pump Remove Only

Customer Options:

Enable / Disable

What it does:

Enable:

Adds the Electronic Steering Pump Module to vehicle configuration.

Disable:

Removes the Electronic Steering Pump Module from vehicle configuration.

Feature: Axle Lockers Remove Only

Customer Options:

Front / Rear / Front & Rear

What it does:

Front:

Enable:

Adds the Front Factory Axle and Front Axle Disconnect Module to vehicle configuration.

Disable:

Removes the Front Factory Axle and Front Axle Disconnect Module from vehicle configuration.

Rear:

Enable:

Adds the Rear Factory Axle Module to vehicle configuration.

Disable:

Removes the Rear Factory Axle Module from vehicle configuration.

Front & Rear:

Enable:

Adds the Front & Rear Factory Axle Module to vehicle configuration.

Disable:

Removes the Front & Rear Factory Axle Module from vehicle configuration.

Feature: Factory Fog Lights

Customer Options:

Enable / Disable

What it does:

Enable:

Add the ability to use factory fog lights if they are added after factory build.

Disable:

Removes Fog light use if factory fog lights are deleted.

*********************************************************************************************

Service Options Menu: Will be useful for troubleshooting/diagnostics for customers and tech support.

*********************************************************************************************

– Module Reset

ABS – Anti-Lock Brake System

BCM – Body Control Module

TPMS – Tire Pressure Monitoring System

IPC – Instrument Panel Cluster

– ABS Initialization – may need to be run multiple times before vehicle accepts new tire/gear size.

*********************************************************************************************

Menu System Layout

*********************************************************************************************

• Running Options

– Engine Idle

– Sway Bar Unlock

– Line Lock

– Rock Lock

– Auto Park Disable

– Exit

• Vehicle Settings

– Tire Size

– Gear Ratio

– Transfer Case Low Gear Ratio

– TPMS Warning Threshold

– TPMS On/Off

– Daytime Running Lights

– DRL Location

– DRL Dropout

– Fog Light Dropout

– Halo Lights

– One Touch Lane Change

– Seat Belt Minder

– Travel Link Weather Warnings

– Splash Screen

– Standard / LED Light

– Auto Stop/Start

– Exit

• Service Options

– Reset Module

– ABS Initialization

– Exit

• Add / Remove Modules

– Auxiliary Switches

– Towing Package

– Blind Spot Detection

– Sway Bar System

– Cargo Camera

– Backup Camera

– Front Axle Disconnect

– Electronic Steering Pump

– Axle Lockers

– Factory Fog Lights

– Exit